There are a few different ways that you can open a tonneau cover. The first way is to use the release latch that is located on the side of the cover. You will need to push down on this latch in order to release the cover.
Another way to open the cover is by using a key. Some covers have a keyed lock that will need to be turned in order to release the cover. Finally, some covers have an electric motor that will automatically open the cover when you press a button.
Truckman – How to Open the New EGR Soft Tonneau Cover
- Locate the release handle or lever on the cover
- This is typically located in the center of the cover, near the front edge
- Open the cover about halfway and prop it up with the built-in support arms, if so equipped
- If your cover does not have support arms, you may need to purchase separate support poles to prop up the cover while you work
- Unclip or unbuckle any retaining straps that are holding down the rear of the cover
- These are typically located at either side near the tailgate
- Fold or roll up the tonneau cover until it is fully open and secured in its upright position
Credit: rhrswag.com
How Do You Open a Locked Tonneau Cover?
If you have a locked tonneau cover and can’t seem to get it open, don’t worry – there are a few things you can try.
First, make sure that the cover is completely closed. Sometimes the locking mechanism can become engaged even when the cover is not fully closed, so this is always worth checking first.
If the cover is fully closed and you still can’t seem to get it open, then your next step is to check the key. If you’re using an electronic key, make sure that it has batteries and that they are working properly. If you’re using a physical key, make sure that it hasn’t become damaged or bent in any way – if it has, then it may not be able to engage with the lock properly.
Once you’ve checked both of those things and you still can’t seem to get the cover open, then your best bet is to contact the manufacturer or a locksmith who specializes in tonneau covers. They’ll be able to help you figure out what’s going on and how to fix it.
How Do You Open a Hard Top Tonneau Cover?
If you have a hard top tonneau cover, there are a few different ways that you can open it. The first way is to simply lift the cover up. This will give you access to the entire bed of your truck.
You can also unscrew the clamps that hold the cover down, and then fold back or remove the cover entirely. Another option is to use a power drill to drill out the rivets that hold the cover in place.
How Do You Open a Pickup Truck Cover?
Assuming you are talking about a hard cover:
There are four main ways to open a hard cover on a pickup truck. The first and most common way is to use the key fob that came with your truck.
There should be a button on the key fob that, when pressed, will unlock and open the cover. The second way is to use the manual release located inside the cab of your truck. This is usually a cord or handle that you can pull to release the locking mechanism and open the cover.
The third way is to use an aftermarket remote control system. These systems work similar to the key fob, but you can install them yourself and they often have additional features like being able to close the cover from outside of the truck. The fourth and final way is to manually unlock each individual lock on the cover.
This is typically only used if none of the other methods are working or if you have lost your key fob/remote control.
How Do You Unlatch a Bed Cover?
Assuming you are talking about a pickup truck bed cover:
There are several types of bed covers for pickup trucks, and the method for unlatching them depends on the type. The most common type is a soft cover, which typically has velcro or snaps along the side to keep it in place.
To unlatch a soft cover, simply unpeel the velcro or unsnap the snaps and fold the cover back. Other types of bed covers include hard covers and tonneau covers. Hard covers usually have clamps that must be released in order to open them, while tonneau covers typically have latches that can be opened by hand.
Conclusion
If you’re looking to add a little extra protection and style to your truck, one option is to install a tonneau cover. Tonneau covers come in many different styles, but they all serve the same purpose: keeping your cargo dry and secure while on the road. Here’s a quick guide on how to open a tonneau cover so you can access your belongings when you need them.
Most tonneau covers are designed with two latches, one at each side of the truck bed. To open the cover, simply unlatch both sides and fold the cover back towards the cab of the truck. Some covers may have additional locks or clamps that need to be released before opening.
Once the cover is open, you can load or unload your cargo as needed. When you’re finished, simply close up the cover and relatch it into place. For added security, some covers come with locking mechanisms that can be used to keep the cover closed even when driving on rough roads or trails.